PU Automatic Electronic Dispensing Machine Glue Injection Machine Air Filter Manufacturing Machine
1. Product introduction
Glue injection machine is used for structural high-pressure chemical pouring glue, using single liquid chemical pouring glue material professional machine, with super high pressure without air pressure source, rapid construction. The body only weighs about 8 kg and is easy to carry and move. The glue injection machine completely solves the inconvenience of relying on the traditional hand pressure air source for power and carrying heavy machinery; The structure design is scientific and simple, which can be repaired without special training, and a humanized self suction feeding system is added. Using the power of machinery, it can raise the working pressure above (200kg / cm2) in 3-6 seconds, and the liquid water stop agent can be effectively poured into the fine cracks of 0.1mm. The construction efficiency is more than three times faster than that of traditional technology, and the waterproof and leakage stopping effect is more lasting and effective.
2. Parameter table
| Pleating height | 8 - 55mm |
| Layers pleated | 1 - 5 |
| Pleating speed | 20 - 150 pleats/min |
| Max. pleating width | 1100mm |
| Thickness of material | 0.5 - 4mm |
| Speed adjustable motor | 1.5KW |
| Power | 1.5KW 380V Heater Power: 3KW Heat Temperature: 200°C |
| Machine weight | 800kgs |
| Machine dimension | 1430mm x 1550mm x 1400mm |
| Alternative width | B-600,B-800,B-1500,B-2100,B3000 mm |
| Alternative height | 15-160 mm |
3. Product advantages
Glue filling machine can better save glue, Glue Kettle and other consumables, so as to reduce the cost. Glue filling machine can achieve automatic dispensing, automatic glue filling, dynamic mixing, fully uniform mixing, avoid the phenomenon of product glue not dry, the quality of the overall promotion. The use of glue filling machine can effectively ensure the quality of each product, with strong product standardization and more competitive market. Using glue filling machine for glue filling can effectively avoid the phenomenon of manual glue filling all over the floor, save the time of cleaning the workshop, and make the workshop cleaner, cleaner and environmentally friendly!
4. Production process
During the fiber optic connector assembly process, you need to spray some glue on the connector before inserting the fiber. The connector is generally a relatively thin and deep tube. When assembling, insert the optical fiber into the thin and deep connector, and then let the dehydration dry, so that the optical fiber is the connector fixed. In order to reduce the change of the light environment at the fixed place of the optical fiber and the connector, the glue is required to be uniform.At present, when spraying glue into thin and deep holes such as fiber optic connectors, manual spraying is used. A syringe is used to inject glue into deep and thin holes such as fiber optic connectors. Generally, glue is injected into this hole. The bottom of a thin and deep hole, so that when a connector such as an optical fiber is inserted, the connector will get stuck in the hole.
Product Tags:
|
|
Pu Electronic Dispensing Air Filter Manufacturing Equipment Glue Injection Images
|
